Dimensions and weights are subject to change due to ongoing technical development, and vary from country to country.
Standard Equipment
Quick-Fix rapid tine changer
The tines are the critical interface to the seedbed. The penetration of the soil needs to be optimised so that crumbling is completely uniform.
LION power harrow tines are swept inwards and slanted to the rear. The soil is loosened intensively and crumbled near the surface. Larger clods and harvest residues can flow through lower down.
Material: 0,7’ / 18 mm (0,5’ / 12 mm 100 series) thick dual tines made from hardened boron steel.The tines are hardened across the full thickness of the material. Hardened right through!
Quick fix – rapid tine changer It's this easy:
1. Remove two linch pins and lock pins. 2. Remove the two tine pieces. 3. Insert the new tines between the tine carrier and clamping plate. 4. Secure in place using the bolts and linch pins. That’s all there is to it! The lock pins and linch pins are protected against dirt and working loose by a cover.
MULCH DRILLING TINE
This tine can be implemented aggressively pointing forwards, or can be trailed.
pointing forwards
Angled forwards, the tines break up the soil from underneath and harvest trash is spread only on the surface of the soil. The finer earth is located at the depth of the seed, whereas larger clods remain on the surface to protect against erosion.
The tine is 0,7’ / 18 mm thick and features blades on both sides. The Quick fix system enables you to change quickly and easily to the trailed position.
Transmission and bearings
Heavy duty transmission
Central gear unit with spiral toothing and tapered roller bearings.
Central p.t.o. shaft inlet, interchangeable gears for adjusting speed, p.t.o. through shaft.
1 Thick-walled fine grain steel box-section for extra torsion.
2 The gear trough is slanted downwards: Earth can escape unhindered, no build up, no scraping against the gear pan.
3 Massive tapered roller bearings in oversized, forged, single-piece bearing housings. Ideal bearing spacing on the rotor shaft; the tapered roller bearings easily handle radial and axial stress for a long service life.
Both the bearings and the sturdy, heat-treated gear wheels are submerged in grease.
The lower bearing is located close to the tine carrier so there is less stress on the bearing, lower wear.
Both bearings are located below the gear wheels so there is no risk of gear damage due to disintegrating bearing parts. Bearings are tightly sealed with labyrinth seals and shaft seals.
4 Dual tines made of fine grain steel - 18 mm thick Ð for long service life even on stony ground.
12 mm thick tines on LION 250 and 300.
5 Double mounting with guard plate and two bolts. Quick and easy to change.
Tines are slanted inwards and swept backwards so they tend to force surface trash downwards, rather than to the side.
6 The forged tine carriers are integrated into the casing so that they are protected and there is no risk of stone impact. Surface trash cannot wrap around the rotor shafts.
LION
Precision in detail The bearing housings are welded into the box section before being milled at the machining centre. This method ensures that the spacing between the rotor axes is absolutely constant: guarantee for extremely smooth running and a long service life. Easy to service Reliable power transmission from the central gear unit through a heavy duty forged coupling flange direct to the bevel gear, not through shaft, so it is easier to service.
Rear rollers / Combination
BAR CAGE ROLLER
9 strong bars provide the best packing.
Cage drum available with a diameter of 16.5” / 420 mm.
Ideal for smaller tractors.
FLEXICOIL ROLLER
Made from 2 x 2’ / 50 x 50 mm steel spirals that are arranged so that they run towards the centre. Spiral diameter: 18’ / 455 mm.
The wedge-shaped spirals provide excellent compaction while the surface remains loose and crumbly so that seeds can be sown at a uniform depth.
Star-shaped scrapers ensure reliable cleaning even in damp conditions.
Lower weight than a toothed packer roller.
TOOTHED PACKING ROLLER
For all soil types: with 21.6” / 550 mm diameter.
The result: Best compaction and crumbling.
The scrapers are located low down. That is why in wet conditions slabs of earth cannot be lifted up - the best possible capillary conditions are achieved for germination of the seed.
The scrapers can be adjusted individually, or as a group from a central point. They can be pivoted away to make cleaning easier.
TOPSOIL PACKING ROLLER
20.6” / 525 mm diameter - lighter than toothed packing roller.
Optimal compaction and crumbling.
Cutting packing rotor
with 21.6” / 550 mm diameter
Hydraulic load alleviation for power harrow
2 hydraulic cylinders with accumulators take the weight of the power harrow and seed drill. The pressure is applied to the trailed roller. The power harrow can then easily be lifted over obstructions.
The hydraulic pressure can be adjusted using the tractor's hydraulics and pressure gauge.
COMBINATION
Combining implements saves time and money Fewer stages of processing, less fuel, less soil compaction, lower costs. Triangulated mounting for seed drills.
Mechanical mountings with length and height adjustable mounting hooks for seed drills. Hydrolift Robust height and length-adjustable mounting hooks. Stroke limiter optional.
LION 3001 and 4001 with new transmission. New interchangeable gear-box features cooling fins for best possible heat dissipation, plus a massive forged coupling flange.
Interchangeable gear set 29/36 is standard The LION 1000 series is a professional machine from head to toe. Proven technology delivers satisfaction in the field. A LION is at home on all kinds of soil: light, heavy or stony. 1Simple headstock
Rock-steady headstock side supports.
The reach of the quick-release coupling hooks can be adjusted to fit various tractor lower links.
Category II or III quick coupling pins.
Integrated suspension system for the best possible ground tracking.
2 Well equipped
Front levelling plate is height-adjustable, rear clod bar is horizontal. Both plates can ride upwards over foreign objects.
The triangle-cross section of the levelling plate feeds the earth smoothly to the tines and roller without causing the earth to pile up.
The suspension system provides exceptional ground hugging, allowing stones to pass through: effective protection against overloading.
3 Side deflectors
Adjust automatically to the working depth, height-adjustable; can be raised for transport.
Guide plates feed loose earth to the trailing roller so that there is no ridge build up.
LION 6000 with a working width of 6 m Two LION 3000 units in a single heavy-duty folding frame.
Robust headstock - Category III for big tractors up to 260 hp.
3-speed central transmission, powerful side gear units for highest performance power transmission and a long service life.
Wide at work, narrow for transport
When raised to the side the transport width is just 2.70 m.
Two double-acting cylinders with check valves provide the necessary safety.
deutsch
english
français
español / latino america
italiano
český
slovak
polski
dansk
suomi
українська
pусский
north america
LION Range 100
